ScanPack ReadMe ScanPack Version 0.1.10661 (08/26/2020) - Got rid of redundant laser writes - Added ULPN-355-20-1-6-M laser - Added routines to write pulse width mode into YLP lasers. Is not used yet. - Check for shorted thermistor - Ignore checking the keyhole properties if the keyhole power is set to 0. - Changes to make PointInBox slightly forgiving for SPK_INVALID_PSOTION error - Derive cmd, msg and status port assignments from the dns-sd host port. The advertised cmd_port is not reliable due to bugs in some scanners. - spk_unlock_sync_domain() no longer returns SPK_DEVICE_UNLOCK_ERROR for cases where the device is already unlocked. - Fix for Installer doesn’t install Bonjour automatically ScanPack Version 0.1.9798 (02/18/2020) - Status DWORD indicates if FPGA has valid hardware transforms for stage tracking. - The stage transform may have reduced rank for 1- or 2-axis systems. - Changed Z to +/-1 mm for Mid power lenses. - ScanPack Version String distinguishes new 32-bit and 64-bit builds. (future) - BugFix: ConfigVectorScan was undefined for the 64-bit build. - Servo MaxAccel was reduced from 15000 to 12500 for 33mmMPM20. - BugFix: Application couldn't unlock a scanner that was locked at startup. - Added ScanPack API to disable/enable Probe AutoTrigger. - Added ScanPack API SetStagePath(), used for calibration. ScanPack Version 0.1.8787 - Added Error Codes and Reset Signal for YLP-HPB Interface ScanPack Version 0.1.8718.0 - Fixed Vector Welding Power issue introduced in 1.0.8312 ScanPack Version 0.1.8646.0 - Support for GroupID/JobID and ObjectID for StoredJobs ScanPack Version 0.1.8312.0 - Support for StoredJobs in Controller - Velocity Power Scaling override with Options.xml  ScanPack Version 0.1.8139.0 - Increased Stage Home Timeouts - PulsePicking Support for Mode Locked Lasers - External Reference Clock Divider for Locking to Mode Locked Lasers - MOF reset coordinate system now does not cause in View notification  ScanPack Version 0.1.7869.0 - Fixed laser status and interlock status in Winlase Laser Properties ScanPack Version 0.1.7700.0 - Allow CW operation of QCW Lasers for Welding ScanPack Version 0.1.7280.0 - Fixed 3D Z direction laser power issue - Support for Laser Optimization in IPGScan  ScanPack Version 0.1.6948.0  - Removed Hang issue associated with using guide laser - Improved laser on timing ScanPack Version 0.1.6893.0  - Improved Timing for SkyWriting - Better Pulse Synchronization for cleaning with YLPN lasers - Added Get_port_c functions ScanPack Version 0.1.6788.0 - Added Options.xml file with fifo options to reduce delay ScanPack Version 0.1.6705.0 - Added GATEDPULSE Laser Type for YLPN Lasers ScanPack Version 0.1.6212.0 - Added 10us Delay between turning guide off and enabling laser ScanPack Version 0.1.6160.0 - Fixed Marker Slow Points introduced in 0.1.6128.0 ScanPack Version 0.1.6128.0 - Fixed IPGWeld Guide ScanPack Version 0.1.6120.0 - Fixed Fifo Minimum and Threshold values when outputing vectors - Do not use for IPGWeld ScanPack Version 0.1.6101.0 - YLP Max Frequency issue - Port F command to control interface error signal - Fixed Save Stage to Workspace Transform scaling issue - Do not use for IPGWeld ScanPack Version 0.1.6033.0 - Decreased lag when previewing with guide - Remember Rotary/Y stage settings when switching back and forth. - Do not use for IPGWeld ScanPack Version 0.1.5919.0 - Graphics Library Support - More aggressive lock  - Should have Controller 5.11.5830 upgrade ScanPack Version 0.1.5786.0 - Lock/Unlock Function Timing Improvements - Added StageTrack API function ScanPack Version 0.1.5591.0 - Additional calibration files and laser types ScanPack Version 0.1.5447.0  - Unavailable time after close changed to 1 second - Pulsed Laser Startup Time increased to 7ms - QCW Laser on single pulse points fixed - Support for GATED Lasers ScanPack Version 0.1.5030.0 - Added Invalid InView Error for IPG Weld ScanPack Version 0.1.4941.0  - Minimum Requirement for Winlase6 Version 6.1.1.71